NextGig Systems, Inc. - Network Connectivity & Test Solutions
NextGig Systems, Inc. - Network Connectivity & Test Solutions
Datacom Systems SINGLEstream™ 10 Gigabit Link Aggregation Tap with 4 - XFP Monitoring Ports Model Number: SS-1206-10G-F
10 Gigabit Full Duplex Aggregation
While traditional taps might enable full-duplex monitoring of all traffic on a network link, they transmit the data to the connected monitoring device in two separate half-duplex streams (one for Tx and one for Rx). Not only does this require the monitoring device to have two network interface cards, it also requires that the device be capable of combining and processing both streams of data in order to monitor both sides of the conversation. Not all monitoring systems, including the most popular software solutions, have the required hardware to aggregate traffic.
The SINGLEstream™ 10 Gigabit Link Aggregation Tap combines both directions of a 10 Gigabit full duplex data stream and allows any connected monitoring device, including those with only one NIC, to receive a copy of all the data - even in a single trace file.
Totally Passive and Power Fault Tolerant
Fiber taps are completely passive devices and are not a point of failure on the network. Even if power is lost to the tap, the network traffic will not be affected. If one side of the link fails for any reason, the device on the other side of the link will recognize this outage immediately, so routers and switches can engage redundant protocols and failover systems.
Dual Stream Mode
For dual-receive capable tools or times when there is no substitute for full line rate data capture (e.g. network attacks), the SINGLEstream™ can be configured to work exactly like a traditional full duplex tap, providing a copy of full-rate Gigabit data to connected tools in two separate streams (Tx and Rx).
Any-to-Any
Any of the SS-1206-10G’s four (4) any-to-any ports can be configured as input (network) or output (monitoring) ports on the fly through easy to use command line interface (CLI). Any monitoring port can receive traffic from any of the other ports, eliminating the need for network managers to change complex network configurations or move tools around their network. Additionally, the any-to-any ports can be configured to receive data from a switch’s SPAN port providing the flexibility of a combined in-line and out-of-band monitoring solution.
Data Filtering
Instead of tools attempting to keep up with high-speed aggregated traffic streams, the SS-1206- 10G-F with data filtering model provides the option of applying filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware filtering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is easier to work with, and issues are resolved quicker. Filters include IP and MAC ranges, VLAN, frame, port number, protocol type, even customizable offsets in the packet header.
100% Network Uptime - fiber tap is completely passive and won’t disrupt the network even if power is lost to the tap
View entire full-duplex conversations using single-interface monitoring tools
Decreased reliance on switch resources for network management visibility - eliminate SPAN port contention, oversubscription, and configuration errors
After installation, deploy tools right away without impacting your production network
Easily share test access points without maintenance windows or approval
Single point of deployment and remote management minimizes management expenses and reduces MTTR
Filtering - Line-rate hardware-based filtering can eliminate port oversubscription and customize data flow to each tool
Hot swapable dual redundant load balanced power supplies
Specifications
Network Connections
One (1) LR, SR, or ER network tap (dual LC connectors)
Monitoring Connections
Four (4) - XFP "Any-to-Any" Ports
Control Port
Serial DB9F
Management Port
RJ45 - 100Mbs Full-Duplex
Split Ratio
50/50 - other split ratios available
Insertion Loss
4.0 dB - varies by split ratio
Power
100-240VAC, 50-60Hz, 0.6-0.2A
Redundant Power Supply
Dimensions (H x W x D)
1.75 x 19.00 x 21.00 in
4.45 x 48.26 x 53.35 cm
Weight
13.75 lbs
6.24 kgs
Operating Temperature
0° to 40°C
Storage Temperature
-30° to 65°C
Humidity
5 to 90% non-condensing
Warranty
One (1) Year Limited Warranty - Support Contract Required
Ordering Information
SS-1206-10G-F
SINGLEstream™ 10 Gigabit Link Aggregation Tap with 4 - XFP Monitoring Ports
Resources
Questions? Call 1-805-277-2400
For more information, pricing, demonstration or evaluation on Datacom Systems Products please contact us here.
The SINGLEstream™ 1206-10G-F can combine full duplex data from one 10 Gigabit network tap into one or more streams of data. Up to four (4) connected 10 Gigabit monitoring devices can receive aggregated data from the tap with just one network interface card (NIC) each. Line-rate hardware filtering can be applied to customize data flow to each tool and eliminate port oversubscription.
All registered and unregistered trademarks are the sole property of their respective owners.
Products | Solutions | Store | Support | News | About Us | Why NextGig? | Employment | Privacy | Sitemap | Contact Us
Copyright © NextGig Systems, Inc. All Rights Reserved.