Datacom Systems Network TAPs

10/100 Ethernet Tap Model Number: 10/100-AT
The 10/100 Full Duplex Ethernet Tap provides network monitoring tools with permanent 24x7 passive monitoring access to 10/100 BaseT Ethernet network segments. Our passive tap technology features exclusive, fault tolerant "no break the link" design ensures network performance will not be affected by power loss.

4-Unit 10/100 Passive Tap (four taps) Model Number: 10/100-PTX4
Four 10/100 passive taps combined into a convenient 1U chassis to save rackspace while providing permanent passive access.

16-Channel PERMAlink™ 10/100 Tap Model Number: 16SY-10/100+1C
The 16SY-10/100+1C Ethernet Tap provides a simple 24 x 7 solution for accessing multiple 10/100 Ethernet segments. Use the 16SY-10/100+1C Ethernet Tap anywhere you need In-Line access and the passive monitoring you can only get from a passive tap solution. Its space-saving design will allow you to tap into sixteen network segments using only one device, while its exclusive PERMAlink™ technology provides the ultimate in fault-tolerance and upgradeability.

10/100 Regeneration Tap (2x1) Model Number: 10/100-AT+2C
The 10/100 Regeneration Tap provides easy 24 x 7 access to your 10/100 Ethernet segments. Two monitoring devices can access the same segment at a single point, eliminating contention for network links. Fault tolerant design will ensure that network performance and integrity will not be affected by power loss.

10/100/1000 Ethernet Tap Model Number: 10/100/1000-TAP
The 10/100/1000 Ethernet Tap provides easy 24 x 7 access to your 10/100 and Gigabit Ethernet network segments, making it an ideal portable network tap for troubleshooting Ethernet networks with multiple port speeds or for security monitoring applications, where you need non-intrusive, dedicated access to your network.

Fiber Tap (1000SX, 50 micron) Model Number: F50/50/50-M
Fiber network taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your fiber network. Topology independent, they can be used for A™, Gigabit, OC3-OC48, or SONET

Fiber Tap (1000SX, 62.5 micron) Model Number: F50/50/62-M
Fiber network taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your fiber network. Topology independent, they can be used for A™, Gigabit, OC3-OC48, or SONET

Fiber Tap (1000LX, 9 micron) Model Number: F50/50/9-S
Fiber network taps from Datacom Systems provide your network monitoring and security tools passive permanent access into your fiber network. Topology independent, they can be used for A™, Gigabit, OC3-OC48, or SONET

Dual Fiber Tap (2 - taps, 1000SX, 50 micron, SC connectors)Model Number: F50/50/50-2SCM
The dual fiber tap combines two separate fiber taps into one small chassis for convenience, allowing you to monitor two multi-mode networks while reducing rack space. Available with a wide array of split ratios

Dual Fiber Tap (2 - taps, 1000SX, 50 micron, LC connectors) Model Number: F50/50/50-2LCM
The dual fiber tap combines two separate fiber taps into one small chassis for convenience, allowing you to monitor two multi-mode networks while reducing rack space. Available with a wide array of split ratios.

Dual Fiber Tap (2 - taps, 1000SX, 62.5 micron, SC connectors) Model Number: F50/50/62-2SCM
The dual fiber tap combines two separate fiber taps into one small chassis for convenience, allowing you to monitor two multi-mode networks while reducing rack space. Available with a wide array of split ratios.

Dual Fiber Tap (2 - taps, 1000SX, 62.5 micron, LC connectors) Model Number: F50/50/62-2LCM
The dual fiber tap combines two separate fiber taps into one small chassis for convenience, allowing you to monitor two multi-mode networks while reducing rack space. Available with a wide array of split ratios.

Dual Fiber Tap (2 - taps, 1000LX, 9 micron, SC connectors) Model Number: F50/50/9-2SCS
The dual fiber tap combines two separate fiber taps into one small chassis for convenience, allowing you to monitor two single mode networks while reducing rack space. Available with a wide array of split ratios.

Dual Fiber Tap (2 - taps, 1000LX, 9 micron, LC connectors) Model Number: F50/50/9-2LCS
The dual fiber tap combines two separate fiber taps into one small chassis for convenience, allowing you to monitor two single mode networks while reducing rack space. Available with a wide array of split ratios.

Quad Fiber Tap (4 - taps, 1000SX, 50 micron, LC connectors) Model Number: F50/50/50-4LCM
The F50/50/50-4LCM Quad Fiber Passive TAP provides permanent access into four multi-mode fiber links. This network TAP is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fi ber TAPs will not affect network performance or integrity.

Quad Fiber Tap (4 - taps, 1000SX, 62.5 micron, LC connectors) Model Number: F50/50/62-4LCM
The F50/50/62-4LCM Quad Fiber Passive TAP provides permanent access into four multi-mode fiber links. This network TAP is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fi ber TAPs will not affect network performance or integrity.

Quad Fiber Tap (4 - taps, 1000LX, 9 micron, LC connectors) Model Number: F50/50/9-4LCS
The F50/50/9-4LCS Quad Fiber Passive TAP provides permanent access into four single mode fiber links. This network TAP is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fi ber TAPs will not affect network performance or integrity.

1000BaseT Copper Gigabit Regeneration Tap (3x1) Model Number: 1000BT-AT+3C

The Copper Gigabit Regeneration Tap provides easy 24 x 7 access to your Gigabit Ethernet segments. Three devices, such as intrusion detection systems, protocol analyzers, or probes can access the same segment at a single point, eliminating contention for network links. With redundant power supply and fault tolerant design, network performance and integrity will not be affected by power loss.

1000BaseT Copper Gigabit Regeneration Tap Kit (7x1) Model Number: 1000BT-AT+7C
The Copper Gigabit Regeneration Tap Kit (7x1) provides easy 24 x 7 access to your Gigabit Ethernet segments. Seven devices, such as intrusion detection systems, protocol analyzers, or probes can access the same segment at a single point, eliminating contention for network links. With redundant power supplies and fault tolerant design, network uptime is maximized and network traffic will continue to flow in the event of a power failure.

10 Gigabit Tap (50 micron) 50/50 split ratio Model Number: F50/50/50-M-10G
10 Gigabit network taps with (50 micron) 50/50 split ratio from Datacom Systems provide your network monitoring and security tools passive permanent access into your 10 Gigabit fiber network.

10 Gigabit Tap (9 micron) 50/50 split ratio Model Number: F50/50/9-S-10G
10 Gigabit network taps with (9 micron) 50/50 split ratio from Datacom Systems provide your network monitoring and security tools passive permanent access into your 10 Gigabit fiber network.

10 Gigabit Dual Fiber Tap (50/50 split ratio, 62.5 micron, LC Connectors)     Model Number: F50/50/62-2LCM-10G
The F50/50/62-2LCM-10G Dual Fiber Passive TAP provides permanent access into two 10 Gigabit fiber links. This network TAP is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fi ber TAPs will not affect network performance or integrity.

10 Gigabit Dual Fiber Tap (50/50 split ratio, 50 micron, LC Connectors) Model Number: F50/50/50-2LCM-10G
The F50/50/50-2LCM-10G Dual Fiber Passive TAP provides permanent access into two 10 Gigabit fiber links. This network TAP is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fi ber TAPs will not affect network performance or integrity.

10 Gigabit Dual Fiber Tap (50/50 split ratio, 9 micron, LC Connectors) Model Number: F50/50/9-2LCS-10G
The F50/50/9-2LCS-10G Dual Fiber Passive TAP provides permanent access into two 10 Gigabit fiber links. This network TAP is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fi ber TAPs will not affect network performance or integrity.

10 Gigabit Quad Fiber Tap (four taps, 50/50 split ratio, 50 micron, LC Connectors) Model Number: F50/50/50-4LCM-10G
The F50/50/50-4LCM-10G Quad Fiber 10 Gigabit passive TAP provides permanent access into four multi-mode fiber links. This network TAP is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fiber TAPs will not affect network performance or integrity.

10 Gigabit Quad Fiber Tap (four taps, 50/50 split ratio, 62.5 micron, LC Connectors) Model Number: F50/50/62-4LCM-10G
The F50/50/62-4LCM-10G Quad Fiber 10 Gigabit passive TAP provides permanent access into four multi-mode fiber links. This network TAP is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fiber TAPs will not affect network performance or integrity.

10 Gigabit Quad Fiber Tap (four taps, 50/50 split ratio, 9 micron, LC Connectors) Model Number: F50/50/9-4LCS-10G
The F50/50/9-4LCS-10G Quad Fiber 10 Gigabit passive TAP provides permanent access into four single mode fiber links. This network TAP is ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network and non-powered, fiber TAPs will not affect network performance or integrity.

T1/E1 Passive Tap Model Number: T1/E1-PT
The T1/E1 Passive Network Tap is a single port device that provides easy, 24 x 7 access to a T1/E1 segment. The T1/E1 Passive Tap's design is non-powered, so it will ensure that network performance and integrity will not be affected by power loss. Use with portable or distributed T1 analyzers, intrusion detection devices, probes, and monitoring devices.

DS3/E3 Passive Tap Model Number: DS3/E3-PT
The DS3/E3 Passive Network Tap provides a "coding-scheme independent" solution to access your DS3 or E3 WAN network for analysis without interruption. The totally passive and fault tolerant design ensures network uptime and will not impact network performance.

Datacom Taps

Link Aggregation Taps

Bypass Switches

Physical Layer Switches

Accessories

About Datacom Systems

Datacom Systems Pricing

Datacom Systems Reseller


Related Products

All Network Taps

Aggregation Switches

Network Monitoring

Network Recording

Ethernet Testing

Network Emulation

Network Cables

Storage Emulation