10 Gigabit Full Duplex Aggregation

While traditional taps might enable full-duplex monitoring of all traffic on a network link, they transmit the data to the connected monitoring device in two separate half-duplex streams (one for Tx and one for Rx). Not only does this require the monitoring device to have two network interface cards, it also requires that the device be capable of combining and processing both streams of data in order to monitor both sides of the conversation. Not all monitoring systems, including the most popular software solutions, have the required hardware to aggregate traffic.

The SINGLEstream™ 10 Gigabit Link Aggregation Tap combines both directions of a 10 Gigabit full duplex data stream and allows any connected monitoring device, including those with only one NIC, to receive a copy of all the data - even in a single trace file.

Totally Passive and Power Fault Tolerant

Fiber taps are completely passive devices and are not a point of failure on the network. Even if power is lost to the tap, the network traffic will not be affected. If one side of the link fails for any reason, the device on the other side of the link will recognize this outage immediately, so routers and switches can engage redundant protocols and failover systems.

Dual Stream Mode

For dual-receive capable tools or times when there is no substitute for full line rate data capture (e.g. network attacks), the SINGLEstream™ can be configured to work exactly like a traditional full duplex tap, providing a copy of full-rate Gigabit data to connected tools in two separate streams (Tx and Rx).

Regeneration

One-to-Many configurations replicate copies of identical network traffic to provide multiple tools monitoring access to the same links. In addition to eliminating contention for access to critical links, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Data Filtering

Instead of tools attempting to keep up with high-speed aggregated traffic streams, the SS-1204-10G-F with data filtering provides the option of applying filters to the data to increase tool efficiency and eliminate port oversubscription. Line-rate hardware filtering on each port allows you to customize and streamline the amount and type of data each connected monitoring tool receives. Because they are receiving only traffic of interest, tools run faster, data is easier to work with, and issues are resolved quicker. Filters include IP and MAC ranges, VLAN, frame, port number, protocol type, even customizable offsets in the packet header.

Reliable and Easy to Use

Unlike setting up operating systems and binding NICs, the SINGLEstream™ Link Aggregation Tap is simple to deploy, and every unit comes with dual redundant power supplies to ensure monitoring uptime.

100% Network Uptime - fiber tap is completely passive and won’t disrupt the network even if power is lost to the tap

View entire full-duplex conversations using single-interface monitoring tools

Decreased reliance on switch resources for network management visibility - eliminate SPAN port contention, oversubscription, and configuration errors

After installation, deploy tools right away without impacting your production network

Easily share test access points without maintenance windows or approval

Single point of deployment and remote management minimizes management expenses and reduces MTTR

Filtering - Line-rate hardware-based filtering can eliminate port oversubscription and customize data flow to each tool

Hot swapable dual redundant load balanced power supplies

Specifications

Network Connections

One (1) LR, SR, or ER network tap (dual LC connectors)

Monitoring Connections

Two (2) - XFP "Any-to-Any" Ports

Control Port

Serial DB9F

Management Port

RJ45 - 100Mbs Full-Duplex

Split Ratio

50/50 - other split ratios available

Insertion Loss

4.0 dB - varies by split ratio

Power

100-240VAC, 50-60Hz, 0.6-0.2A

Redundant Power Supply

Dimensions (H x W x D)

1.75 x 19.00 x 21.00 in

4.45 x 48.26 x 53.35 cm

Weight

13.75 lbs

6.24 kgs

Operating Temperature

0° to 40°C

Storage Temperature

-30° to 65°C

Humidity

5 to 90% non-condensing

Warranty

One (1) Year Limited Warranty - Support Contract Required

Ordering Information

SS-1204-10G-F

SINGLEstream™ 10 Gigabit Link Aggregation Tap (LR, SR, or ER)

Resources

Questions? Call  1-805-277-2400

For more information, pricing, demonstration or evaluation on Datacom Systems Products please contact us here.

The SINGLEstream™ 1204-10G can combine full duplex data from one 10 Gigabit network tap into one or more streams of data. Connected 10 Gigabit monitoring devices can receive aggregated data from the tap with just one network interface card (NIC) each. Hardware-filtering can be applied to customize data flow to each tool and eliminate port oversubscription.