1-805-277-2400
Select Page

100BASE-T1 SFP Module

Description

The 100BASE-T1 SFP Module is the optimum solution to convert between 100BASE-T1 and SGMII. It fits into a standard Small Form-factor Pluggable (SFP) and generates 100 Mbit/s full-duplex 100BASE-T1.

When plugged into approved devices, it configures itself to Automotive 100BASE-T1 after power up. Master/slave mode of operation can be set with the DIP switch.

Registers of the integrated Transceiver are accessible via I2C interface for diagnosis and reconfiguration.

It works seamlessly with Technica Engineering’s MediaGateway which has one SFP slot. In any other case, please contact us for more info.

 

Features

  • 100BASE-T1 and SGMII converter
  • Fits into a standard SFP Slot
  • Power requirements: 3.3 Volt DC
  • Supports I2C for internal register access
  • DIP switch for Master/ Slave configuration
  • Size: 68 x 14 x 14 mm

Similar Products

1000Base-T1 SFP Module unit

1000BASE-T1 SFP Module

1000Base-T1 MediaConverter unit

1000BASE-T1 MediaConverter

100Base-T1 MediaConverter NXP unit

100BASE-T1 MediaConverter NXP


NextGig Information Request

NextGig Information Request

I would like: (Check all that apply)