NextGig Systems, Inc. - Network Connectivity & Test Solutions

Net Optics iTap 10 GigaBit Fiber Port Aggregator with XFP

The iTap 10 GigaBit Port Aggregator is Net Optics’ most flexible network monitoring Tap for 10 GigaBit networks. As more traffic converges onto higher speed network links, the need to maintain application, performance, and security standards has never been greater. Fortunately, capturing the data needed to keep a network running has never been easier, with this device’s combination of network interfaces supported, XFP choices for monitor ports, easy-to-use management functionality, and new filtering options.


Aggregation Flexibility


The iTap 10GigaBit Port Aggregator combines and regenerates both directions of a full-duplex stream, sending aggregated traffic out one or two separate monitoring ports. Typically, full-duplex monitoring would require two NICs (or a dual-channel NIC) in the monitoring tool—one interface for each side of the full-duplex link. Aggregation allows one or two tools to simultaneously monitor a link using only one NIC per tool.

Redundant tools and appliances are now easily attached to the link to monitor data, voice, and video traffic when needed. If a monitoring resource is required elsewhere in the network, at least one tool or appliance is always available to monitor vital traffic. Or, two different types of tools can monitor the same link simultaneously, enabling different groups to obtain the data they need without contention.

Information Intelligence


The iTap functionality provides displays in GUI form and on the front panel to view link utilization levels in real time. See the size and time of the last peak, when thresholds are exceeded, and more. A 10/100 management port interface enables remote management and monitoring from anywhere in the network, giving you the information you need to quickly respond to network events.


Indigo Management Software


Net Optics Web Manager and System Manager let you remotely set parameters, view status information, and monitor traffic statistical data. These interfaces provide security and performance information such as the number of oversized packets and CRC errors.  Remotely set alarm thresholds, clear traffic data counters, and turn on or off a Monitor Port.

Web Manager– a browser-based interface that lets you change settings, view status, and retrieve data remotely with simple-to-use controls. View all configuration, status, and traffic data from a single page. Changes to the configuration can be made with a few clicks of the mouse.


System Manager
– an SNMP management platform that offers centralized control of all Net Optics iTap devices in the network, to manage your entire monitoring access platform. As with Web Manager, you can view all status, configuration, and traffic information and make changes quickly to any iTap in the system. Each iTap can also be assigned to groups that identify workgroup, location, or organizational naming criteria. View SNMP trap information for system, thresholds, link, and power status. And, take advantage of easy-to-use reporting tools to baseline network behavior and share with upper management and colleagues. Existing industry standard SNMP management platforms can also be fully integrated using Net Optics Management Information Base (MIB).

Security – Optional functionality lets users configure the Port Aggregator so it will not display data on the LCD, and to disable the Management Port, thus preventing it from being accessed from the network. The Monitor Ports can also be turned off to prevent unauthorized access to the network link.


Enhanced Traffic Monitoring


An optional timestamping function appends a 32-bit timestamp to each packet sent to the monitor ports. This feature provides valuable information for tools that can process timestamp data to analyze detailed network timing. The timestamp includes a bit that indicates which network port the packet originated from.


An optional packet slicing function copies only the first N bytes of each packet to the monitor ports, for monitoring applications that only need to see header or front-of-packet information. Use of this feature can substantially reduce bandwidth on the monitor ports so even high rates of full-duplex traffic won’t exceed the monitor port or tool capacity. Packet slicing is also useful for applications such as lawful intercept where the monitor tool may be legally prohibited from seeing packet payload data.


Additional options for conditioning the data copied to the monitor ports includes the ability to drop packets with CRC errors, to regenerate good CRC check bytes, and to restrict the maximum packet size to an amount set by the user.

Reliability


Because of the amount of traffic and business dependency on today’s networks it is important that 100 percent of the data that crosses a link, even layer 1 and 2 errors, is captured. When Span ports, hubs, or installing a tool or appliance in-line are not options, an in-line Tap provides the right alternative for compliance, forensics, and network and applications trouble-shooting.


In the event the monitoring tool or Tap exhibits a power outage, the Net Optics hardware-based Fast Path function ensures that traffic across the link is not interrupted. Traffic to the monitor ports is stopped, but quickly re-established once power returns.


Redundant power connections in the Tap provide unsurpassed uptime protection.



Out of the Box Installation


Getting started is a snap with Net Optics. All necessary network and monitoring cables for plug-and-play deployment are included with the Tap. Everything you need, right out of the box.


Doing Our Part

We are dedicated to ensuring user safety, minimizing power consumption, and developing products that are increasingly environmentally friendly. Each of our Taps adheres to UL and CE safety certifications, FCC, VCCI, and C-Tick EMC certifications, and RoHS and WEEE environmental certifications.

Operating Specifications:
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non condensing


Mechanical Specifications:

Power Supply:
Input: 100-240 VAC, 0.5A, 47-63Hz
Output: 12V, 5A
Dimensions: 1.375" high x 11.0" deep x 8.75" wide


Singlemode:

Cable Type: Singlemode, Corning 8.5/125µm, wavelength 1310nm
Transceiver: Gigabit LR 1310nm, VCSEL
Monitor Port: Output Power: -10 dB
Splitter Specifications:
50/50: Network Port, 3.7 dB
Link Distance Supported: 2 km


Multimode:

Cable Type: Multimode, Corning 50 or 62.5/125µm, wavelength 850nm
Transceiver: Gigabit SR 850nm, VCSEL
Monitor Port: Output Power: -9.5 dB
Splitter Specifications:
50/50: Network Port, 4.5 dB
Link Distance Supported: 220 meters


Software:

Command Line Interface: Any terminal emulation software
Net Optics WebManager: Any browser
Net Optics System Manager: Windows 98, Windows 2000, Windows XP


Connectors:

(2) XFP slots for XFP modular connectors
(2) Duplex LC connectors (network ports)


Certifications:

Fully RoHS compliant


Part Numbers:

IPA-SR5-XFP
IPA-50SR5-XFP
IPA-LR5-XFP
IPA-ER5-XFP




Passive, Secure Technology

 

Two-line display for at-a-glance utilization monitoring

Threshold LED alarms

Remote traffic statistics and control

Security options control user access

Supports full-duplex monitoring with a single NIC, increasing monitoring efficiency

Provides complete full-duplex visibility at 10Gbps without data stream interference or introducing a point of failure

Passes all traffic (including errors) from all layers for comprehensive troubleshooting

Redundant power ensures monitoring uptime

Fully IEEE 802.3 compliant

Fully RoHS compliant

Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

 
Software


Web Manager browser-based interface for remote monitoring and control of individual taps

Net Optics System Manager for remote control and monitoring of multiple iTaps throughout the network via SNMP

Net Optics Management Information Base (MIB) is fully compatible with third-party SNMP management tools

SNMP traps include alarms for utilization level, link status, and power status



Ease of Use


LED indicators show threshold, alarm, redundant power, link, and activity status

Front-mounted connectors support easy installation and operation

All network and monitoring cables included

Optional 19-inch rack frames hold up to two iTaps

Compatible with all major manufacturers' monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems



Part Numbers

iTap 10 GigaBit SR Port Aggregator Tap    

- IPA-SR5-XFP
 
Port Agg iTap, IL, Fiber, 10G, SR
  62.5µm, 50:50, 850nm, XFP Ports
- IPA-50SR5-XFP
 
Port Agg iTap, IL, Fiber, 10G, SR
  50µm, 50:50, 850nm, XFP Ports

- RK-iTP2
 
2-Slot iTap Rack Mount Frame

 

iTap GigaBit LR Port Aggregator Tap

- IPA-LR5-XFP
 
Port Agg iTap, IL, Fiber, 10G, LR
  8.5µm, 50:50, 1310nm, XFP Ports


XFP Modules

- XFPKT-SR
 
Kit, Fiber, 10G, SR XFP
  Transceiver(850nm) w/cable 62.5µm
- XFPKT-LR
 
Kit, Fiber, 10G, LR XFP
  Transceiver(1310nm) w/cable 8.5µm
(minimum order Qty 1 per unit)


Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

net_optics_evaluation.html
net_optics_register.html
net_optics_quick_quote.html

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400

 
/body>