Get six times the traffic visibility for monitoring and security devices by connecting a Net Optics 6 Station ATM Fiber Tap to up to six critical network links. The all-optical design of the 6 Station ATM Fiber Tap is optimized and tested for high-performance on ATM fiber networks. Available for both singlemode and multimode fiber, ATM Fiber Taps support passive monitoring of ATM, SONET, and FDDI links at speeds of 622 Mbps.

All Optical Design

Requiring no power, the 6 Station ATM Fiber Taps establish permanent passive access ports for up to six monitoring devices without introducing a point of failure or disturbing other network connections. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Compact Connectivity

Occupying only one rack unit, the streamlined 6 Station ATM Fiber Tap connects up to six monitoring devices to six different links. Full-duplex monitoring is a snap with a custom monitoring cable that sends each side of the signal to a separate NIC on the monitoring device.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Operating Specifications:
Operating Temperature: -40°C to 85°C
Storage Temperature: -55°C to 85°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Dimensions: 1.75” high x 3.5” deep x 17” wide

Connectors:
(6) Duplex SC connector (monitoring ports)
(12) Duplex SC connectors (network ports)

Certifications:
Fully RoHS compliant

Part Numbers:

Six Station ATM Multimode Tap
TP6-MM5-SC
TP6-MM4-SC
TP6-MM3-SC
TP6-MM2-SC
TP6-MM1-SC

Six Station ATM Singlemode Tap
TP6-SM5-SC
TP6-SM4-SC
TP6-SM3-SC
TP6-SM2-SC
TP6-SM1-SC

Passive, Secure Technology

 

Provides passive access at speeds of 622 Mbps without data stream interference or introducing a point of failure

All-optical design is optimized and tested for ATM fiber networks

Connect up to six monitoring devices to six different links and monitor them simultaneously

Permanent in-line installation without affecting network performance

Passes all full-duplex traffic (including errors) from all layers for comprehensive troubleshooting

No IP address is needed for the Tap or monitoring device, enhancing monitoring security

Completely transparent to the network and requires no power

Fully RoHS compliant

Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

 

Ease of Use

Front-mounted connectors make installation and operation quick and easy

Connectors are perfectly angled to reduce cable strain

Silk-screened application diagram illustrates all connections for easy deployment

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

Part Numbers

Six Station ATM Multimode Tap

- TP6-MM5-SC
  Splitter Tap, 6 Segment, 1G, MM
  62.5µm, SC, 50:50 split ratio
- TP6-MM4-SC
  Splitter Tap, 6 Segment, 1G, MM
  62.5µm, SC, 60:40 split ratio
- TP6-MM3-SC
  Splitter Tap, 6 Segment, 1G, MM
  62.5µm, SC, 70:30 split ratio
- TP6-MM2-SC
  Splitter Tap, 6 Segment, 1G, MM
  62.5µm, SC, 80:20 split ratio
- TP6-MM1-SC
  Splitter Tap, 6 Segment, 1G, MM
  62.5µm, SC, 90:10 split ratio

Six Station ATM Singlemode Tap

- TP6-SM5-SC
  Splitter Tap, 6 Segment, 1G, SM 
  8.5µm, SC, 50:50 split ratio
- TP6-SM4-SC
  Splitter Tap, 6 Segment, 1G, SM 
  8.5µm, SC, 60:40 split ratio
- TP6-SM3-SC
  Splitter Tap, 6 Segment, 1G, SM 
  8.5µm, SC, 70:30 split ratio
- TP6-SM2-SC
  Splitter Tap, 6 Segment, 1G, SM 
  8.5µm, SC, 80:20 split ratio
- TP6-SM1-SC
  Splitter Tap, 6 Segment, 1G, SM 
  8.5µm, SC, 90:10 split ratio

Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400