Redesigned for scalable high-density applications, Net Optics GigaBit Fiber Taps are now super compact. The new slim profile of the GigaBit Fiber Tap saves rack space-install up to six Taps in a one rack unit panel. The all-optical design of the GigaBit Fiber Tap is optimized and tested for high-performance on GigaBit fiber networks. Available for both singlemode and multimode fiber, GigaBit Fiber Taps support passive monitoring of GigaBit links at 1000 Mbps.

All Optical Design

Requiring no power, the GibaBit Fiber Taps establish permanent passive access ports without introducing a point of failure or disturbing other network connections. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Simply Plug It In

Full-duplex monitoring is a snap with a custom monitoring cable that sends each side of the signal to a separate NIC on the monitoring device. All network and monitoring cables necessary for plug-and-play deployment are included with the Tap.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Operating Specifications:
Operating Temperature: -40ºC to 85ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Dimensions: .81” high x 4.25” deep x 5.5” wide

Connectors:
(1) Duplex SC connector (monitor port)

(2) Duplex SC connectors (network ports)

Certifications:
Fully RoHS compliant

Part Numbers:
GigaBit Multimode Fiber Tap

TP-SX5-SCSLM

TP-SX4-SCSLM

TP-SX3-SCSLM

TP-SX2-SCSLM

TP-SX1-SCSLM

GigaBit Singlemode Fiber Tap

TP-LX5-SCSLM

TP-LX4-SCSLM

TP-LX3-SCSLM

TP-LX2-SCSLM

TP-LX1-SCSLM

Passive, Secure Technology

 
Provides passive access at 1000 Mbps without data stream interference or introducing a point of failure

All-optical design is optimized and tested for GigaBit fiber networks

Permanent in-line installation without affecting network performance

Passes all full-duplex traffic (including errors) from all layers for comprehensive troubleshooting

No IP address is needed for the Tap or monitoring device, enhancing monitoring security

Completely transparent to the network and requires no power

Fully RoHS compliant

Warranty

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

Ease of Use

Front-mounted connectors make installation and operation quick and easy

Connectors are perfectly angled to reduce cable strain

All Network and monitoring cables included

Silk-screened application diagram illustrates all connections for easy deployment

Optional 19-inch rack frames hold up to 6 Taps

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

Part Numbers

GigaBit SX Fiber Tap, 62.5um

  

- TP-SX5-SCSLM
  Slim Tap, Fiber, 1G, SX 62.5µm,  
  SC, 850nm, 50:50 split ratio
- TP-SX4-SCSLM
  Slim Tap, Fiber, 1G, SX 62.5µm,  
  SC, 850nm, 60:40 split ratio
- TP-SX3-SCSLM
  Slim Tap, Fiber, 1G, SX 62.5µm,  
  SC, 850nm, 70:30 split ratio
- TP-SX2-SCSLM
  Slim Tap, Fiber, 1G, SX 62.5µm,  
  SC, 850nm, 80:20 split ratio
- TP-SX1-SCSLM
  Slim Tap, Fiber, 1G, SX 62.5µm,  
  SC, 850nm, 90:10 split ratio

- RK-6V2
  6-Slot Rack Mount Frame


GigaBit LX Fiber Tap, 8.5um

 

 - TP-LX5-SCSLM
  Slim Tap, Fiber, 1G, LX 8.5µm, SC, 
  1310nm, 50:50 split ratio
- TP-LX4-SCSLM
  Slim Tap, Fiber, 1G, LX 8.5µm, SC, 
  1310nm, 60:40 split ratio
- TP-LX3-SCSLM
  Slim Tap, Fiber, 1G, LX 8.5µm, SC, 
  1310nm, 70:30 split ratio
- TP-LX2-SCSLM
  Slim Tap, Fiber, 1G, LX 8.5µm, SC, 
  1310nm, 80:20 split ratio
- TP-LX1-SCSLM
  Slim Tap, Fiber, 1G, LX 8.5µm, SC, 
  1310nm, 90:10 split ratio

 

 

GigaBit SX Fiber Tap, 50um

- TP-50SX5-SCSLM

  Slim Tap, Fiber, 1G, SX 50µm, SC,

  850nm, 50:50 split ratio

- TP-50SX4-SCSLM

  Slim Tap, Fiber, 1G, SX 50µm, SC,

  850nm, 60:40 split ratio

- TP-50SX3-SCSLM

  Slim Tap, Fiber, 1G, SX 50µm, SC,

  850nm, 70:30 split ratio

- TP-50SX2-SCSLM

  Slim Tap, Fiber, 1G, SX 50µm, SC,

  850nm, 80:20 split ratio

- TP-50SX1-SCSLM

  Slim Tap, Fiber, 1G, SX 50µm, SC,

  850nm, 90:10 split ratio

Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400