Redesigned for scalable high-density applications, Net Optics ATM Taps are now super compact. The new slim profile of the ATM Tap saves rack space-install up to six Taps in a one rack unit panel. The all-optical design of the ATM Tap is optimized and tested for high-performance on ATM fiber networks. Available for both singlemode and multimode fiber, ATM Taps support passive monitoring of ATM, SONET, and FDDI links at speeds up to 622 Mbps.

All Optical Design

Requiring no power, the ATM Taps maintain permanent passive access ports without introducing a point of failure or disturbing other network connections. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Simply Plug It In

Full-duplex monitoring is a snap with a custom monitoring cable that sends each side of the signal to a separate NIC on the monitoring device. All network and monitoring cables necessary for plug-and-play deployment are included with the Tap.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Operating Specifications:
Operating Temperature: -40°C to 85°C
Storage Temperature: -55°C to 85°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Dimensions: .81” high x 4.25” deep x 5.5” wide

Connectors:
(1) Duplex SC connector (analyzer port)
(2) Duplex SC connectors (network ports)

Certifications:
Fully RoHS compliant

Part Numbers:

ATM Multimode Tap
TP-MM5-SCSLM
TP-MM4-SCSLM
TP-MM3-SCSLM
TP-MM2-SCSLM
TP-MM1-SCSLM

ATM Singlemode Tap
TP-SM5-SCSLM
TP-SM4-SCSLM
TP-SM3-SCSLM
TP-SM2-SCSLM
TP-SM1-SCSLM

Passive, Secure Technology

 

Provides passive access at speeds of 622 Mbps without data stream interference or introducing a point of failure

All-optical design is optimized and tested for ATM fiber networks

Permanent in-line installation without affecting network performance

Passes all full-duplex traffic (including errors) from all layers for comprehensive troubleshooting

No IP address is needed for the Tap or monitoring device, enhancing monitoring security

Completely transparent to the network and requires no power

Fully RoHS compliant

Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

Ease of Use

Front-mounted connectors make installation and operation quick and easy

Connectors are perfectly angled to reduce cable strain

All network and monitoring cables included

Silk-screened application diagram illustrates all connections for easy deployment

Optional 19-inch rack frames hold up to 6 Taps

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

Part Numbers

ATM Multimode Tap, 62.5um 

 

- TP-MM5-SCSLM
  Slim Tap, Fiber, MM 62.5µm, SC,
  1300nm, 50:50 split ratio
- TP-MM4-SCSLM
  Slim Tap, Fiber, MM 62.5µm, SC,
  1300nm, 60:40 split ratio
- TP-MM3-SCSLM
  Slim Tap, Fiber, MM 62.5µm, SC,
  1300nm, 70:30 split ratio
- TP-MM2-SCSLM
  Slim Tap, Fiber, MM 62.5µm, SC,
  1300nm, 80:20 split ratio
- TP-MM1-SCSLM
  Slim Tap, Fiber, MM 62.5µm, SC,
  1300nm, 90:10 split ratio

- RK-6V2
  6-Slot Rack Mount Frame

 ATM Singlemode Tap, 8.5um

 

- TP-SM5-SCSLM
  Slim Tap, Fiber, SM 8.5µm, SC, 
  1310nm, 50:50 split ratio
- TP-SM4-SCSLM
  Slim Tap, Fiber, SM 8.5µm, SC, 
  1310nm, 60:40 split ratio
- TP-SM3-SCSLM
  Slim Tap, Fiber, SM 8.5µm, SC, 
  1310nm, 70:30 split ratio
- TP-SM2-SCSLM
  Slim Tap, Fiber, SM 8.5µm, SC, 
  1310nm, 80:20 split ratio
- TP-SM1-SCSLM
  Slim Tap, Fiber, SM 8.5µm, SC, 
  1310nm, 90:10 split ratio

Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400