NextGig Systems, Inc. - Network Connectivity & Test Solutions

Net Optics 4x1 OC-3 Regeneration Tap

Net Optics 4x1 OC-3 Regeneration Taps solve the key physical layer challenges of multi-device monitoring for OC-3 networks. For a better picture of network health, these Taps connect up to four different network management and security devices at any single OC-3 network location.


One Tap, No Idle Resources


Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility


Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Splitter Specifications:
Split Ratio: 50/50


Fiber Type:
Multimode Corning 62.5/125µm, wavelength 1300nm
Insertion Loss: Network Port: 4.5 dB
Monitor Port: 9.0 dB


Fiber Type:
Singlemode Corning 8.5/125µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB
Monitor Port: 7.4 dB


Operating Specifications:

Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing


Mechanical Specifications:

Power Supply:
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.75” high x 10.5” deep x 17” wide


Connectors

(4) Duplex SC connectors (monitor ports)
(2) Duplex SC connectors (network ports)


Fiber Optic Interface:

Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and
EN 60825-1, also UL 1950 applications.

Optical Transmitter Wave Length: Multimode Fiber, 1300 nm wavelength

Output Power: -19 dB min, -14 dB max
Optical Receiver Input Sensitivity: -14 dB min to -31 dB max
Optical Transmitter Wave Length: Singlemode Fiber, 1310 nm wavelength

Output Power: -15 dB min, -8 dB max
Optical Receiver Input Sensitivity: -31 dB max


Certifications:

Fully RoHS compliant


Part Numbers:

4x1 OC-3 MM Regeneration Tap
RGN-MM-OC3-IL4
4x1 OC-3 SM Regeneration Tap
RGN-SM-OC3-IL4



Passive, Secure Technology

 

Enables real-time, simultaneous monitoring of a single OC-3 link with four monitoring devices

Supports passive monitoring at 155 Mbps

No IP address is needed for the Tap or monitoring device, enhancing monitoring security

Fully RoHS compliant


Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

 

Ease of Use


LED indicators show power and link status

Front-mounted connectors support easy installation and operation

Connectors are perfectly angled to reduce cable strain

Silk-screened application diagram illustrates all connections for easy deployment

Optional custom monitoring cables support easy full-duplex monitoring by sending each side of the signal to a separate monitoring device NIC

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems



Part Numbers

4x1 OC-3 MM Regeneration Tap

- RGN-MM-OC3-IL4
  Regen, 4x1, IL, Fiber, OC3, MM
  62.5µm, SC, 1300nm

4x1 OC-3 SM Regeneration Tap

- RGN-SM-OC3-IL4
  Regen, 4x1, IL, Fiber, OC3, SM
  8.5µm, SC, 1310nm

   


Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

net_optics_evaluation.html
net_optics_register.html
net_optics_quick_quote.html

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400

 
/body>