Net Optics 2x1 OC-3 Regeneration Taps solve the key physical layer challenges of multi-device monitoring for OC-3 networks. For a better picture of network health, these Taps connect two different network management and security devices at any single OC-3 network location.

One Tap, No Idle Resources

Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability

For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.

Splitter Specifications
Split Ratio: 50/50

Fiber Type: Multimode Corning 62.5/125µm, wavelength 1300nm
Insertion Loss: Network Port: 4.5 dB 
Monitor Port: 9.0 dB

Fiber Type: Singlemode Corning 8.5/125µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB
Monitor Port: 7.4 dB

Operating Specifications
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications
Power Supply: 
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.75” high x 10.5” deep x 17” wide

Connectors
(2) Duplex SC connectors (monitoring ports)
(2) Duplex SC connectors (network ports)

Fiber Optic Interface
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and
EN 60825-1, also UL 1950 applications.

Optical Transmitter Wave Length: Multimode Fiber, 1300 nm wavelength
Output Power: -19 dB min, -14 dB max
Optical Receiver Input Sensitivity: -14 dB min to -31 dB max

Optical Transmitter Wave Length: Singlemode Fiber, 1310 nm wavelength
Output Power: -15 dB min, -8 dB max
Optical Receiver Input Sensitivity: -31 dB max

Certifications:
Fully RoHS compliant

Part Numbers:
2x1 OC-3 MM Regeneration Tap
RGN-MM-OC3-IL2
2x1 OC-3 SM Regeneration Tap
RGN-SM-OC3-IL2

Passive, Secure Technology

 

Enables real-time, simultaneous monitoring of two 1000 Mbps span sessions, with up to two monitoring devices

Supports monitoring of all traffic forwarded by network switch span ports, including VLANs

No IP address is needed for the Tap or monitoring device, enhancing monitoring security

Redundant power ensures monitoring uptime

Fully IEEE 802.3 compliant

Fully RoHS compliant 

Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

 

Ease of Use

LED indicators show power and link status

Front-mounted connectors support easy installation and operation

Connectors are perfectly angled to reduce cable strain

Silk-screened application diagram illustrates all connections for easy deployment

Optional custom monitoring cables support easy full-duplex monitoring by sending each side of the signal to a separate monitoring device NIC

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

Part Numbers

2x1 OC-3 MM Regeneration Tap

- RGN-MM-OC3-IL2
  Regen, 2x1, IL, Fiber, OC3, MM
  62.5µm, SC, 1300nm

2x1 OC-3 SM Regeneration Tap 

- RGN-SM-OC3-IL2
  Regen, 2x1, IL, Fiber, OC3, SM
  8.5µm, SC, 1310nm

Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400