NextGig Systems, Inc. - Network Connectivity & Test Solutions

Net Optics 8x1 10 GigaBit Regeneration Tap

Net Optics 10 GigaBit Regeneration Taps solve the key physical layer challenges of attaching multiple 10 Gbps monitoring tools on 10 GigaBit fiber networks. For a complete picture of network health, Regeneration Taps copy identical traffic streams four or eight different network management and security devices for complete protocol trouble-shooting.


One Tap, No Idle Resources


Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.


Security and Visibility


Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.


Reliability

For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power source.

Splitter Specifications:
Split Ratio: 50/50
Fiber Type: SR Multimode Corning 50µm, wavelength 850nm
Insertion Loss: Network Port: 4.5 dB
Monitor Port: 4.5 dB max
Fiber Type: LR Singlemode Corning 8.5µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB 
Monitor Port: 3.7 dB max

Operating Specifications:
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing


Mechanical Specifications:

Power Supply:  
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.75” high x 10.5” deep x 17” wide


Connectors:

(4 or 8) Duplex SC connectors (monitor ports)
(2) Duplex SC connectors (network ports)


Fiber Optic Interface:

Fiber Type:
Multimode Corning 50µm, wavelength 850nm (SR)
Singlemode Corning 8.5µm, wavelength 1310nm (LR)
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and EN 60825-1, also UL 1950 applications.
Optical Transmitter Wave Length:
850 nm nominal (SR), 1310 nm nominal (LR)
Output Power:
-9.5 dB min, -4 dB max (SR), -10 dB min, -3 dB max (LR)
Optical Receiver Input Sensitivity:
0 dB min, -17 dB max (SR), -3 dB min, -20 dB max (LR)


Certifications:

Fully RoHS compliant


Part Numbers:

RGN-50SR-IL8
RGN-SR-IL4
RGN-LR-IL8
RGN-LR-IL4



Passive, Secure Technology

 

Optimized and tested for 10 GigaBit fiber networks with 50µm fiber

Enables real-time, simultaneous monitoring of a single 10 GigaBit link with four or eight monitoring devices

Provides complete full-duplex visibility at 10 Gbps without data stream interference or introducing a point of failure

Passes all traffic (including errors) from all layers for comprehensive troubleshooting

No IP address is needed for the Tap or monitoring device, enhancing monitoring security

Redundant power ensures monitoring uptime

Fully RoHS compliant


Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

 

Ease of Use


LED indicators show redundant power, speed, link, and activity status

Front-mounted connectors support easy installation and operation

Connectors are perfectly angled to reduce cable strain

Silk-screened application diagram illustrates all connections for easy deployment

Optional custom monitoring cables support easy full-duplex monitoring by sending each side of the signal to a separate monitoring device NIC

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems 



Part Numbers

8x1 10 GigaBit SR Regeneration Tap

  - RGN-50SR-IL8

  Regen, 8x1, IL, Fiber, 10G, SR

  50µm, SC, 850nm

4x1 10 GigaBit SR Regeneration Tap

- RGN-SR-IL4

  Regen, 4x1, IL, Fiber, 10G, SR

  50µm, SC, 850nm

8x1 10 GigaBit LR Regeneration Tap

- RGN-LR-IL8

  Regen, 8x1, IL, Fiber, 10G, LR

  8.5µm, SC, 1310nm

4x1 10 GigaBit LR Regeneration Tap

- RGN-LR-IL4

  Regen, 4x1, IL, Fiber, 10G, LR

  8.5µm, SC, 1310nm


Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

net_optics_evaluation.html
net_optics_register.html
net_optics_quick_quote.html

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400

 
/body>