NextGig Systems, Inc. - Network Connectivity & Test Solutions
NextGig Systems, Inc. - Network Connectivity & Test Solutions
Net Optics 10 GigaBit LC Fiber Tap
The need to measure traffic loads on networks that carry VoIP, videoconferencing, and security applications has never been greater. A reliable, high-performance 10Gbps cabling system that utilizes passive in-line Taps is a fundamental asset in today’s leading organizations, to increase productivity while decreasing operational costs.
Net Optics 10 GigaBit LC-based Fiber Taps are optimized and tested for high-performance 10Gbps fiber networks. Available in single-mode and multi-mode fiber, the 10 GigaBit Tap supports passive monitoring, stealth operation, and 24x7 reliability.
All Optical Design
Requiring no power, the 10 GibaBit LC Fiber Taps maintain permanent access ports for monitoring tools, without introducing a point of failure or interfering with network connections. The passive nature of the 10 GigaBit Tap delivers full-duplex monitoring with 100 percent network traffic visibility, including layer 1 and 2 errors. The optical split ratio can be selected to match the monitoring requirements of your network.
Simply Plug It In
Full-duplex monitoring is a snap with the supplied custom monitoring cable that sends each side of the network link to a separate NIC on the monitoring tool. All necessary network and monitoring cables for plug-and-play deployment are included.
Security and Visibility
Because the Tap does not require an IP address, both the Tap and attached monitoring tools are isolated from the network, dramatically reducing their exposure to attacks. The combination of stealth operation and traffic monitoring through the network takes secure visibility to a new level, ideal for achieving Data Security Compliance.
Choose the Right Rack Mount Frame
The LC Fiber Taps fit into the new 8 slot rack frame. Part number: RK-8V2
Doing Our Part
We are dedicated to ensuring user safety, and developing products that are increasingly environment friendly. All of our 10 GigaBit LC Fiber Taps adhere to UL and CE safety certifications; FCC, VCCI, and C-Tick EMC certifications; and RoHS and WEEE environmental certifications.
Operating Specifications:
Operating Temperature: -40ºC to 85ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 10% min, 95% max, non-condensing
Mechanical Specifications:
Dimensions: .8” high x 4.25” deep x 4” wide
Connectors:
(1) Duplex LC connector (monitor port)
(2) Duplex LC connectors (network ports)
Certifications:
Fully RoHS compliant
Part Numbers:
10 GigaBit Multimode Fiber Tap
TP-SR5-LCSLM
TP-SR4-LCSLM
TP-SR3-LCSLM
TP-SR2-LCSLM
TP-SR1-LCSLM
10 GigaBit Singlemode Fiber Tap
TP-LR5-LCSLM
TP-LR4-LCSLM
TP-LR3-LCSLM
TP-LR2-LCSLM
TP-LR1-LCSLM
Passive, Secure Technology
Provides passive access at 10,000 Mbps without data stream interference or introducing a point of failure
All-optical design is optimized and tested for 10 GigaBit fiber networks
Permanent in-line installation without affecting network performance
Passes all full-duplex traffic (including errors) from all layers for comprehensive troubleshooting
No IP address is needed for the Tap or monitoring device, enhancing monitoring security
Completely transparent to the network and requires no power
Fully RoHS compliant
Warranty
All Net Optics products come standard with a 1 year manufacturer's warranty
Optional 1 or 2 year extended warranty available at time of product purchase
Ease of Use
Front-mounted connectors make installation and operation quick and easy
Connectors are perfectly angled to reduce cable strain
All network and monitoring cables included
Optional 19-inch rack frames hold up to 8 Taps
Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems
Part Numbers
10 GigaBit SR Fiber Tap, 62.5um
- TP-SR5-LCSLM
Slim Tap, Fiber, 10G, SR 62.5µm,
LC, 850nm, 50:50 split ratio
- TP-SR4-LCSLM
Slim Tap, Fiber, 10G, SR 62.5µm,
LC, 850nm, 60:40 split ratio
- TP-SR3-LCSLM
Slim Tap, Fiber, 10G, SR 62.5µm,
LC, 850nm, 70:30 split ratio
- TP-SR2-LCSLM
Slim Tap, Fiber, 10G, SR 62.5µm,
LC, 850nm, 80:20 split ratio
- TP-SR1-LCSLM
Slim Tap, Fiber, 10G, SR 62.5µm,
LC, 850nm, 90:10 split ratio
- RK-8V2
8-Slot Rack Mount Frame
10 GigaBit LR Fiber Tap, 8.5um
- TP-LR5-LCSLM
Slim Tap, Fiber, 10G, LR 8.5µm, LC,
1310nm, 50:50 split ratio
- TP-LR4-LCSLM
Slim Tap, Fiber, 10G, LR 8.5µm, LC,
1310nm, 60:40 split ratio
- TP-LR3-LCSLM
Slim Tap, Fiber, 10G, LR 8.5µm, LC,
1310nm, 70:30 split ratio
- TP-LR2-LCSLM
Slim Tap, Fiber, 10G, LR 8.5µm, LC,
1310nm, 80:20 split ratio
- TP-LR1-LCSLM
Slim Tap, Fiber, 10G, LR 8.5µm, LC,
1310nm, 90:10 split ratio
- TP-xx-LCSLM-W1
1 Year Extended Warranty
- TP-xx-LCSLM-W2
2 Year Extended Warranty
10 GigaBit SR Fiber Tap, 50um
- TP-50SR5-LCSLM
Slim Tap, Fiber, 10G, SR 50µm, LC,
850nm, 50:50 split ratio
- TP-50SR4-LCSLM
Slim Tap, Fiber, 10G, SR 50µm, LC,
850nm, 60:40 split ratio
- TP-50SR3-LCSLM
Slim Tap, Fiber, 10G, SR 50µm, LC,
850nm, 70:30 split ratio
- TP-50SR2-LCSLM
Slim Tap, Fiber, 10G, SR 50µm, LC,
850nm, 80:20 split ratio
- TP-50SR1-LCSLM
Slim Tap, Fiber, 10G, SR 50µm, LC,
850nm, 90:10 split ratio
* "xx" in warranty part # denotes fiber type
Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.
Resources
For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.
Aggregator Taps
Connectivity
Bypass Switches
Indigo Pro
Related Products
All Network Taps
Aggregation Switches
Network Monitoring
Network Recording
Ethernet Testing
Network Emulation
Network Cables
Storage Emulation
Questions? Call 1-805-277-2400
All registered and unregistered trademarks are the sole property of their respective owners.
Products | Solutions | Store | Support | News | About Us | Why NextGig? | Employment | Privacy | Sitemap | Contact Us
Copyright © NextGig Systems, Inc. All Rights Reserved.