Operating Specifications:
Operating Temperature: 0ºC to 55ºC
Storage Temperature: -10ºC to 70ºC
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Input Power: 100-240V, 0.5A, 47-63Hz
Output Power: 5V 2.4A
Dimensions: 1.25" high x 4.2" deep x 4.5" wide

Cable Interface:
Copper Cable Type: 22-24 AWG unshielded twisted pair cable, CAT5/CAT5E
Link Distance Supported: 100 meters

Connectors:
(2) RJ45, 8 pin connectors (monitor ports)
(2) RJ45, 8 pin connectors (network ports)

Certifications:
Fully RoHS compliant

Part Number:
BP-CU3

Passive, Secure Technology

 

Fail-open monitoring with any 10/100/1000 in-line appliance at speeds up to 1000 Mbps

Increased reliability on critical network links

High-speed optical switching with minimal insertion loss

Fully RoHS compliant

Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

 

Ease of Use

LED indicators show power, speed, link, and activity status

Front-mounted connectors support easy installation and operation

Cables included for plug-and-play deployment

Silk-screened application diagram illustrates all connections for easy deployment
Optional 19-inch rack frames holds two units

Tested and compatible with all major manufacturers intrusion detection and prevention systems

Part Numbers

10/100/1000 Bypass Switch

- BP-CU3
  Bypass, Copper, 10/100/1G

- RK-3
  Rack Panel Frame, 3-Slot 19"
- RK-12
  Rack Panel Frame, 12-Slot 19"

Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Net Optics Bypass Switches provide a permanent and trouble-free access port for in-line network security and monitoring devices. The Bypass Switch automatically switches network traffic through added in-line devices or bypasses devices that are about to be removed. Prevent link failure when attached IPS and IDS devices lose power by powering the Bypass Switch and in-line device from the same power source.

Simply Plug It In

High-availability for links with in-line devices is a snap with supplied cables. All network and monitoring cables necessary for plug-and-play deployment are included with the Bypass Switch.

Uninterrupted Traffic

The Bypass Switch supports fail-open monitoring with any 10/100/1000 GigaBit in-line device when it shares the same power source as the in-line appliance. While the Bypass Switch is receiving power, it diverts network traffic to attached in-line devices. In this state, all in-line traffic is routed directly to the device connected to the Bypass Switch. When power is lost, Fast Path maintains network link integrity with high-speed switching.

When the Bypass Switch loses power, in-line traffic continues to flow through the network link, but is no longer routed through the device. This allows the network devices to be removed and replaced without network downtime. Once power is restored to the Bypass Switch, network traffic is seamlessly diverted to the in-line device, allowing it to resume its critical functions.

Questions? Call  1-805-277-2400