NextGig Systems, Inc. - Network Connectivity & Test Solutions

Net Optics 10 GigaBit Fiber Tap

Get total traffic visibility for monitoring and security devices by placing Net Optics 10 GigaBit Fiber Taps on critical network links. The all-optical design of the 10 GigaBit Fiber Tap is optimized and tested for high-performance on 10 GigaBit fiber networks. Available for both singlemode and multimode fiber, 10 GigaBit Fiber Taps support passive monitoring of GigaBit links at 10,000 Mbps.

All Optical Design

Requiring no power, the 10 GibaBit Fiber Taps maintain permanent passive access ports without introducing a point of failure or disturbing other network connections. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Simply Plug It In



Simply Plug It In

Full-duplex monitoring is a snap with a custom monitoring cable that sends each side of the signal to a separate NIC on the monitoring device. All network and monitoring cables necessary for plug-and-play deployment are included with the Tap.

Security and Visibility


Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2


Operating Specifications:
Operating Temperature: -40ºC to 85ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 10% min, 95% max, non-condensing


Mechanical Specifications:
Dimensions: .81” high x 4.25” deep x 5.5” wide


Connectors:
(1) Duplex SC connector (monitor port)
(2) Duplex SC connectors (network ports)


Certifications:
Fully RoHS compliant


Part Numbers:
10 GigaBit Multimode Fiber Tap
TP-SR5-SCSLM
TP-SR4-SCSLM
TP-SR3-SCSLM
TP-SR2-SCSLM
TP-SR1-SCSLM
10 GigaBit Singlemode Fiber Tap
TP-LR5-SCSLM
TP-LR4-SCSLM
TP-LR3-SCSLM
TP-LR2-SCSLM
TP-LR1-SCSLM

Passive, Secure Technology

 

Provides passive access at 10,000 Mbps without data stream interference or introducing a point of failure

All-optical design is optimized and tested for 10 GigaBit fiber networks

Permanent in-line installation without affecting network performance

Passes all full-duplex traffic (including errors) from all layers for comprehensive troubleshooting

No IP address is needed for the Tap or monitoring device, enhancing monitoring security

Completely transparent to the network and requires no power

Fully RoHS compliant


Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase


Ease of Use


Front-mounted connectors make installation and operation quick and easy

Connectors are perfectly angled to reduce cable strain

All network and monitoring cables included

Silk-screened application diagram illustrates all connections for easy deployment

Optional 19-inch rack frames hold up to 6 Taps

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems


Part Numbers

10 GigaBit SR Fiber Tap, 62.5um


- TP-SR5-SCSLM
  Slim Tap, Fiber, 10G, SR 62.5µm,   
  SC, 850nm, 50:50 split ratio
- TP-SR4-SCSLM
  Slim Tap, Fiber, 10G, SR 62.5µm,   
  SC, 850nm, 60:40 split ratio
- TP-SR3-SCSLM
  Slim Tap, Fiber, 10G, SR 62.5µm,   
  SC, 850nm, 70:30 split ratio
- TP-SR2-SCSLM
  Slim Tap, Fiber, 10G, SR 62.5µm,   
  SC, 850nm, 80:20 split ratio
- TP-SR1-SCSLM
  Slim Tap, Fiber, 10G, SR 62.5µm,   
  SC, 850nm, 90:10 split ratio

- RK-6V2
  6-Slot Rack Mount Frame

 

10 GigaBit LR Fiber Tap, 8.5um

 

- TP-LR5-SCSLM
  Slim Tap, Fiber, 10G, LR 8.5µm, SC,
  1310nm, 50:50 split ratio
- TP-LR4-SCSLM
  Slim Tap, Fiber, 10G, LR 8.5µm, SC,
  1310nm, 60:40 split ratio
- TP-LR3-SCSLM
  Slim Tap, Fiber, 10G, LR 8.5µm, SC,
  1310nm, 70:30 split ratio
- TP-LR2-SCSLM
  Slim Tap, Fiber, 10G, LR 8.5µm, SC,
  1310nm, 80:20 split ratio
- TP-LR1-SCSLM
  Slim Tap, Fiber, 10G, LR 8.5µm, SC,
  1310nm, 90:10 split ratio


- TP-xx-SCSLM-W1
1 Year Extended Warranty
- TP-xx-SCSLM-W2
2 Year Extended Warranty

 
 

10 GigaBit SR Fiber Tap, 50um

- TP-50SR5-SCSLM

  Slim Tap, Fiber, 10G, SR 50µm, SC,

  850nm, 50:50 split ratio

- TP-50SR4-SCSLM

  Slim Tap, Fiber, 10G, SR 50µm, SC,

  850nm, 60:40 split ratio

- TP-50SR3-SCSLM

  Slim Tap, Fiber, 10G, SR 50µm, SC,

  850nm, 70:30 split ratio

- TP-50SR2-SCSLM

  Slim Tap, Fiber, 10G, SR 50µm, SC,

  850nm, 80:20 split ratio

- TP-50SR1-SCSLM

  Slim Tap, Fiber, 10G, SR 50µm, SC,

  850nm, 90:10 split ratio

* "xx" in warranty part # denotes fiber type



Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

net_optics_evaluation.html
net_optics_register.html
net_optics_quick_quote.html

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400

 
/body>